Installing your blinds is a piece of cake - Here's what you need.
- Pencil
- Screwdriver
- Drill or screw Machine
- Tape Measure
- 🎵 Our Spotify Playlist
Before you start
To hang your blinds securely, use the right supplies for each type of surface:
Surface |
Supplies |
Drywall |
Drywall anchors & screws |
Wood |
Screws |
Stone / Concrete |
Anchors & screws |
The blind inside the frame (recess or inside fit)
1. Positioning the brackets
Place each bracket 7.5 cm from the corner of the frame. Screw them in tightly.
- If you use more than 2 brackets, space them evenly.
- Ensure the brackets don’t interfere with the mechanism or spool in the top box.
Now you’re ready to hang your blinds with ease!
⚠️ BUT BE CAREFUL!
Always check at the top of the box to ensure the bracket isn’t pressing on the control mechanism or spool. If it is, move the bracket slightly toward the center.
2. Clicking in the brackets
Place the top box into the brackets. Close the scissor support until you hear a click—this means it’s secure.
3. Attaching cord holders
If you like, you can attach cord holders. This step is optional.
Installing the outside of the frame (face or outside fit)
1. Marking
Hold your blinds above the window and use a pencil to mark where the ends fall.
2. Positioning the brackets
Place a bracket 7.5 cm from your pencil mark, keeping in mind the full height of your blinds.
- If you’re using more than 2 brackets, space them out evenly.
- You’ve got this!
⚠️ PAY ATTENTION
Always check at the top of the box to ensure the bracket isn’t pressing on the control mechanism or spool. If it is, move the bracket slightly toward the center.
3. Securing the top box
Place the top box into the brackets. Close the scissor support until you hear a click—this means it’s secure.
4. Attaching cord holders
If you like, you can attach cord holders. This step is optional.
Side guidance
If your Mr. Jealousy blinds include side guidance, you’ll find 4 extra plastic supports and a guide wire in the box.
• For a Face Fit (mounting on the frame), use the L-shaped supports.
• For a Recess Fit (attaching against the glass bead or windowsill), use the smaller supports.
1. Place the cord
Put the metal guide cord into the top box of the blinds, keeping the spring centered. Thread the cord through the notch in the blinds.
2. Placing the supports
Set the supports so the guide wire runs directly under the top box.
3. Placing the locking ring
Slide the locking ring over the guide wire.
4. Adjusting the locking ring
At the bracket’s height, tighten the locking ring while gently pulling the guide wire taut.
5. Cutting the wire
Trim off any excess wire and firmly push the locking ring into the bracket.
Still Having Trouble?
If you need more help, don’t worry—we’re here for you! Visit our contact page to chat with us via the app or live chat. You can also find plenty of simple video guides on YouTube.
Mind the children
Loose cords can be dangerous for children, as they may get tangled or strangled. To keep your little ones safe, follow these instructions.
• Keep cords out of reach: Ensure all loose cords are inaccessible to children.
• Arrange furniture safely: Place beds, cribs, and other furniture away from windows with blinds.
• Avoid tying cords: Do not tie cords together. Make sure there are no loops or tangles in the cords.
Remember: All our blinds come with a Child Safety system to enhance safety.