Hanging is a breeze, here's what you need.
- Pencil
- Screwdriver
- Drill/Screw Machine
- Tape Measure
- 🎵 Our Spotify Playlist
Before you start
What do you need for which surface to hang the blinds securely?
| Surface |
Supplies |
| Drywall |
Drywall anchors & screws |
| Wood |
Screws |
| Stone / Concrete |
Anchors & screws |
The blind inside the frame (Recess fit)
1. Positioning the brackets
Place the brackets 7.5 cm from the corner in the frame and screw them in tightly. With more than 2 brackets, distribute them evenly at your discretion. Just make sure the brackets don't press on the mechanism or the spool in the top box.
⚠️ BUT BE CAREFUL!
Always check at the top of the box if the bracket is not on the control or spool. If it is, move the bracket a bit towards the center.
2. Clicking in the brackets
Place the top box in the brackets. Turn the scissor support closed. *Click* and it's secure.
3. Attaching cord holders
If you want, you can attach cord holders, but it's not necessary.
The blind Face Fit
1. Marking
Hold your blinds above the window and mark the ends with a pencil.
2. Positioning the brackets
Place the bracket 7.5 cm next to your freshly made mark, taking into account the maximum height of your blinds. With more than 2 brackets, distribute them evenly at your discretion. You can do it, we're sure of it.
⚠️ PAY ATTENTION
Always check at the top of the box if the bracket is not on the control or spool. If it is, move the bracket a bit.
3. Securing the top box
Place the top box in the brackets. Turn the scissor support closed. *Click* and it's secure.
4. Attaching cord holders
If you want, you can attach cord holders, but it's not necessary.
Side guidance
If you've ordered Mr. Jealousy's with side guidance, you'll find 4 extra plastic supports in the box including a guide wire. Use the L-shaped supports if you want to mount your blinds on the frame, i.e., 'Face fit'. The smaller supports are needed if you want to attach the blinds against the glass bead or windowsill, i.e., 'Recess fit'.
1. Placing the cord
Place the metal guide cord in the top box of the blinds and keep the spring in the middle. Thread the cord through the notch in the blinds.
2. Placing the supports
Place the supports so that the guide wire is directly under the top box.
3. Placing the locking ring
Slide the locking ring over the guide wire.
4. Adjusting the locking ring
Tighten the locking ring at the height of the bracket while slightly pulling the guide wire taut.
5. Cutting the wire
Cut off the excess wire and push the locking ring firmly into the bracket.
Help!
If you're still having trouble, no problem, we're happy to help you further. Visit our contact page and chat with us via the app or chat. We're here for you.
On YouTube you can also find plenty of videos that explain it simply.
Mind the children
Loose cords and children are not a good combination. Children can get strangled in the pull cords. To prevent this, follow the instructions below.
- Keep all loose cords out of reach of children.
- Place beds, cribs, or other furniture away from the window.
- Do not tie cords together. Ensure there are no loops in the cords and that they do not get tangled.
- All our blinds come with a Child Safety system.
